The chamfering machine should be inspected and maintained regularly according to the following matters:

1. After each shift, sort out the iron filings remaining on the machine tool and keep the machine tool clean.
2. Check the tightness of the belt and make adjustments if necessary.
3. Always check whether the fastening screws of various parts are loose.
4. Add No. 46 lubricating oil to the bearings of the cutter shaft every 6 months.
5. If the blade is worn or damaged, adjust the blade and rotate it to an angle using other cutting edges, and then stabilize it. If the cutting edges on all four sides of the blade have been worn.
   The above are the maintenance precautions for the chamfering machine.

Precision Chamfering and Measuring Solution for Double-Ended Tubes and Solid Bars Experience advanced precision with our OD 60mm Double Tube End Chamfering and Measuring system. Designed for high-efficiency tube processing, this system is capable of simultaneously chamfering both ends of tubes up to 1000 mm in length, ensuring accuracy within a tight tolerance of +/- 0.03 mm.
Our innovative 3-Axial series integrates chamfering and precise length measurement, streamlining your tube finishing processes. The optional BTM (Bundle Loading Magazine) further enhances productivity by automating tube loading, feeding, chamfering, and measuring operations.
Equipped with a relative length measuring system, the machine can be programmed to halt production if multiple pieces deviate from the specified length tolerance, ensuring consistent quality control.
Ideal for creating clean, even chamfers on both ends of tubes, our system offers versatile chamfering options, including internal and external (I/O) chamfers and face chamfers, as well as radius (round) chamfers. It’s also perfectly suited for the external chamfering of solid bars, providing a comprehensive solution for your tube and bar finishing needs.

Parameters

The tube chamfering machine deburr chamfer and creates precision tubing for the tubing industries. In most cases you will need both internal and external chamfering capabilities for pipe ends and tube finishes.

The chamfering machine is composed of a machine body, an outer corner chamfering worktable, a positioning pallet, an inner corner chamfering worktable, an inner corner rotating cutter head, an outer corner rotating cutter head, a motor and a transmission mechanism. It is installed vertically on the horizontal upper plate of the body, The outer corner rotating cutter head has a transmission mechanism at its lower end shaft. The inner corner rotating cutter head is exposed from the inner corner cutter head exposure hole in the center of the vertically lifting inner corner chamfering workbench. It is located directly above the above-mentioned outer corner rotating cutter head and the lower side of the positioning platform. The groove is combined with the exposed hole of the external corner cutter head of the external corner chamfering workbench, and the end surface forms an exposed hole of the external corner cutter head exposed by the external corner rotating cutter head. A lifting device is set between the external corner chamfering workbench and the horizontal upper plate of the machine body to make the external corner The chamfering workbench is raised and lowered vertically so that the outer corner rotary cutter head in the outer corner cutter head exposure hole can be adjusted.

What is the process of chamfering machine?

Product detected > Stop centering and positioning > Loading head goes down to vacuum > Loading head goes up > Transfer machine moves forward > Loading head goes down to release vacuum > Loading head goes up and transfer machine goes backward > Press arm presses down > Workbench rotates > Internal and external swing Arm feeds in for grinding > Swing arm retracts after grinding > Lift the pressing arm > Reverse the worktable to reset > Lower the unloading head to vacuum > Move the transfer machine forward to take out the product > Simultaneously load the product cycle.

The CNC tube chamfering equipment can offer further capabilities such as tube tapering or tube facing.

The characteristics of chamfering machine are as follows:

1. Fully automatic and suitable for long materials.
2. Stronger cutter head design, the cutter head is firmly fixed and the life of the cutter head is increased.
3. The belt vibrates the entire material to ensure orderly arrangement.
4. Automatic feeding, saving manpower.
5. PLC control, no contacts and no defects.
6. Dual-stage feed speed saves man-hours and the slow speed makes it easy to adjust the process to perfection.
7. The specially designed feeding mechanism is reliable and reliable. The intermediate conveying station can select the required type according to the outer diameter of the pipe. Type exchange is easy and time-saving.

Tube chamfering machine is a specialized tool used to create chamfered edges on pipes. Chamfering is the process of angling or beveling the outer edge of a tube at a specific angle to facilitate easier installation, improve flow, and reduce the risk of injury during handling. Tube/Pipe chamfering machines are commonly used in various industries such as plumbing, construction, manufacturing, and oil and gas.

The expanding oil and gas industry is fueling the demand for tube chamfering machines. As the oil and gas sector continues to explore and develop new oil and gas fields, there is a growing requirement for efficient production and transportation of oil and gas through pipes. Tube chamfering machines play a vital role in ensuring proper alignment and connection of pipes in these operations, leading to increased demand.

Our tube chamfering machine is designed for achieving a clean and uniform chamfer on single and both tube ends, effectively chamfering the interior and exterior (I/O) as well as the face of the material, or creating a rounded chamfer. Additionally, it’s ideal for external chamfering of solid bars also the center hole drilling.